Skip to content

Base 3 Expansion Module Support

The Base 3 Firmware does not support all SiteMonitor Expansion Modules that the Base II and original Base Unit support. This document describes the supported modules.

All Modules designed and released after September 30, 2020

Any newly designed modules designed and released after September 30, 2020 will be supported by the Base 3. All of these modules will have a serial number greater than 159743. Note that each module will have a certain firmware version or later to support it which will be documented in the main Base 3 firmware release notes around the time of the release of the product.

This does not necessarily apply to modules which were manufactured after the above date. There are some earlier modules we continue to manufacture and ship which are not supported by the Base 3.

Modules designed prior to September 30, 2020

The table below shows the current support status for all of the SiteMonitor modules in the new Base 3 Classic Edition. This table will change with each successive release of the Base 3 firmware. The meaning of each support status type is shown in the next section.

Serial Number Range Module Description Support Status
155648 - 159743 Power Distribution Unit 5, Agnostic Sep 30 2020
151552 - 155647 Single Port Gigabit Injector, Agnostic Rev K0 Sep 30 2020
147456 - 151551 PowerInjector for Cambium Sync Rev J0 Sep 30 2020
126976 - 131071 Single Port Gigabit Injector Rev J0 Sep 30 2020
122880 - 126975 10/100 PowerInjector+Canopy Sync Rev J0 Apr 05 2020
118784 - 122879 Gigabit PowerInjector+Canopy Sync Rev J0 Apr 05 2020
114688 - 118783 Gigabit SyncInjector Rev I0 Apr 05 2020
110592 - 114687 2 Relay 3 Switch Rev H0 Sep 30 2020
106496 - 110591 8 Port Gigabit PoE Rev H0 Sep 30 2020
102400 - 106495 4 Port Gigabit PoE Rev H0 Sep 30 2020
98304 - 102399 5 PDU Rev H0 Sep 30 2020
94208 - 98303 Airfiber PoE Rev H0 Sep 30 2020
90112 - 94207 3Shunt3Volt Rev H0 Sep 30 2020
86016 - 90111 0Shunt6Volt Rev H0 Sep 30 2020
81920 - 86015 2Shunt4Volt Rev H0 Sep 30 2020
77824 - 81919 Gigabit SyncInjector Rev H1 Apr 05 2020
73728 - 77823 Morningstar MeterBus (modbus) RevH Under Consideration
69632 - 73727 SwitchIn6 Rev H0 Sep 30 2020
65536 - 69631 Relay4 Rev H0 Sep 30 2020
61440 - 65535 Temperature Control Unit Rev H0 Under Consideration
57344 - 61439 SyncInjector 430 Rev H1 Apr 05 2020
53248 - 57343 SyncInjector 100 Rev H1 Apr 05 2020
49152 - 53247 DB9 Serial Rev H0 Under Consideration
45056 - 49151 8 Port PoE Rev H0 Sep 30 2020
40960 - 45055 4 Port PoE Rev H0 Sep 30 2020
36864 - 40959 SyncInjector 430 Rev H0 Apr 05 2020
32768 - 36863 SyncInjector 100 Rev H0 Apr 05 2020
28672 - 32767 RevC SiteMonitor Controlled Injector Will not be supported
24576 - 28671 Morningstar MeterBus (modbus) Unknown
20480 - 24575 DB9 Serial Expansion Unknown
16384 - 20479 Temperature Control Unit Unknown
12288 - 16383 4 Port PoE Unknown
8192 - 12287 6 Channel Switch Expansion Unknown
4096 - 8191 4 Channel Relay Expansion Unknown

The status column has the following meanings:

Status Meaning
Sep 30 2020 (or another date) Fully supported in this release - Date shown is the date this module was first supported by the firmware.
Will not be supported This module will not be supported in the Base 3 Platform.
Under Consideration Will possibly be supported in an upcoming version of the firmware
Unknown We do not have enough information to determine if the unit can be supported. Usually this is a result of the device being old enough that we do not know if it is even able to be field-upgraded.